Bransonic
Accessories
DHA1000
Cell Disrupter
Spray Washers
Automated Systems
Wire Baskets
IC Series
How Ultrasonic
   Cleaners Work
Home

 

 

 

CTC Logo Cleaning Tech, LLC
5222 Stonegate Drive, North Myrtle Beach, SC  29582
(800) 771-6720
Fax: (866) 546-1558
CleaningTech@aol.com

DHA-1000 Ultrasonic Cleaner

Ultrasonic_Cleaner INTEGRATED DESIGN

INDUSTRIAL
ULTRASONIC CLEANER


For Your Ultrasonic Cleaning Needs . . .

DHA-1000 ULTRASONIC CLEANER

This low cost ultrasonic cleaner is designed especially for medium and heavy duty industrial applications. It is fully integrated, with ultrasonic generator and cleaning tank in a single enclosure. Solution capacity is 10 gallons - enough to handle large, bulky parts or for batch cleaning of small components. It's the only industrial size ultrasonic cleaner of its type available today.

MANY SOLUTIONS AND USES

The DHA-1000 unit is suitable for use with alkaline, mildly acidic, neutral or caustic aqueous solutions to clean electronic and electrical subassemblies; fabricated metal or plastic components; glass and other materials prior to inspection, assembly or further processing.

RUGGED STAINLESS STEEL TANK

Its deep-drawn tank of 304L stainless steel has no corner welds or other dirt-catching surfaces. The tank is insulated for low heat loss and low noise operation. Low-watt density heaters maintain the cleaning solution at the proper temperature for maximum cleaning effectiveness. High efficiency piezoelectric transducers are attached to the tank bottom. The tank also has a stainless steel drain.

DEPENDABLE SOLID STATE CIRCUITRY

All circuitry is solid state for long, trouble-free life. There are no fans or other moving parts to wear out. Separate heater and generator controls are provided, and the unit is equipped with an R.F.I. filter to meet FCC radio frequency interference standards. Branson DHA-1000 cleaner is a completely self-contained integrated unit; installation requires only a power connection.

  • DHA-1000 (117 volts) - Part Number 000-914-506
  • DHA-1000 (220 volts) - Part Number 000-914-606
  • Cover - Part Number 100-246-802
  • Basket - Part Number 000-916-016
  • Tank Dimensions: 14"L x 16"H x 10.5"D (35.6 x 40.6 x 26.7 cm)
  • External Dimensions: 17"L x 19"H x 19"D (43.2 x 48.3 x 48.3 cm)
  • Heater Wafts: 1000
  • Power Requirements: 120 Volts, single phase, 50/6OHz (12 amps max.)
  • Capacity: 10 Gallons (38 liters)
  • Shipping Weight: 70 lbs. (32 kg)

Typical Applications

Medical Lab Cleaning and Scientific Labs

Thoroughly removes blood, proteins, and contaminants.
Safe and effective for cleaning:

  • Lab Glassware, Test Tubes, Pipettes
  • Optical and Contact Lenses, Eyeglass Frames
  • Scientific Instruments, Components

Industrial Cleaning

Deep cleans to remove dirt, grease, waxes, and oils.
Cleaning technology for your:

  • Switches
  • Relays and Motors
  • Gears
  • Precision Bearings
  • Metal and Plastic Parts
  • Assemblies

Electronic Cleaning

Removes flux and contaminants instantly, thoroughly.
Clean small and fragile electronic parts:

  • PC Boards, SMDs
  • Ceramic Substrates
  • Capacitors
  • Lapping Heads
  • Packaging Components
  • Quartz Crystals
  • High-resolution Glass Plates

Medical and Dental Lab Cleaning

Used with sterilization it's a safer, surer way to clean dental and medical instruments.

  • Cannulae
  • Syringe Parts
  • Surgical Instruments
  • Blood oxygenators
  • Dental Instruments
  • Burs, Dentures, Caps, Plates

Jewelry Cleaning

Cleans thoroughly, restores brilliance

  • Watches
  • Clock Movements
  • Precious Metals and Gemstones
  • Intricate Settings
  • Chains, Charms
  • Coins

 

Home | Bransonic | Accessories | DHA1000 | Cell Disrupter | Spray Washers | Automated Systems
Wire Baskets | BC Series | How Ultrasonic Cleaners Work

© Copyright 2013, Cleaning Tech, LLC. All Rights Reserved.